Agri-Fab 45-0491 Betriebsanleitung PDF herunterladen (Seite 10)

THIS SECTION IS FOR TRACTORS WITH A

MAN UAL ATTACHM ENT CLUTCH

if your tractor has an electric attachment clutch go to

step 18 on page 12.

STEP 11: (SEE FIGURE 9)

• Attach the cable bracket to the double hole in the

clutch/idler assembly as shown, using a 5/1 6" × 3/4"

carriage bolt and a 5/16" nylock nut. Place the bolt in

the front hole of the bracket and in the end of the hole

closest to the pulley. Do not tighten yet.

5/16" × 3/4"

CARRIAGE BOLT

CABLE

BRACKET

FIGURE 9

{

_ 5116" NYLOCK

NUT

STEP 12: (SEE FIGURE 10)

• Attach the pulley (long end of hub facing down) and

the 3/8" spacer to the clutch/idler assembly. Use

a 3/8" x 3-1/4" hex bolt, a 3/8" washer, a 3/8" lock

washer and a 3/8" hex lock nut.

• Insert a tensioning chain through the hole shown and

attach the end link to the spring on the lower idler arm.

STEP 13: (SEE FIGURE 11)

• Attach each rear pulley frame bracket to the inside of

the clutch/idler assembly using two 5/16" x 3/4" hex

bolts, 5/16" washers and 5/16" nylock nuts.

• Attach each front pulley frame bracket to the inside

of the clutch/idler assembly using two 5/16" x 1" hex

bolts, four 5/16" washers and two 5/16" nylock nuts.

5/16" x 1"

(2) 5/16"

HEX BOLT WASHERS

5/16" x 3/4" _ 5/16"

HEX BOLT _ NYLOCK

5116" WASHER NUT

FIGURE 11

STEP 14: (SEE FIGURE 12)

• Two different length drive belts are included with your

snow thrower. Use the longer, 56" drive belt (#48138)

on tractors with manual attachment clutches.

• Slightly loosen the hex bolt next to the flat idler pulley.

Installthe drive belt down between the hex bolt and the

flat idler pulley with the flat side of the belt against the

pulley. Retighten the hex bolt.

• Loop the belt around the large V-pulley, placing it

between the V-pulley and the hex bolt next to the pulley.

Place the belt to the inside of the other flat idler pulley.

FIGURE 10

TENSiONiNG CHAIN

HEX BOLTS

iDLER

PULLEYS

(#46136) 7

DRIVE BELT

FIGURE 12

Did you select the correct drive belt for your

tractor? Using the wrong length belt may

cause premature bearing or belt failure.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Agri-Fab 45-0491 Betriebsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schneewerfer Agri-Fab 45-0491